Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustThe pipe wall looks intact from the outside, but how much steel is left inside?Core product temperature can be documented even when nobody is watching the thermometerVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%Three measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustThe pipe wall looks intact from the outside, but how much steel is left inside?Core product temperature can be documented even when nobody is watching the thermometer

The Gear Tooth Micrometer with Disc-Shaped Measuring Faces: When Tooth Thickness Determines Whether a Gear Runs Smoothly or Fails

Published July 2, 2026 at 06:04

For any mechanic who has tried to measure the tooth thickness of a gear with an ordinary micrometer, the frustrating part is familiar: why does the same tooth give three different readings depending on where the spindle contacts it? The reason is obvious once you think about it, but it creates a mechanical problem that an ordinary micrometer cannot solve. The tooth is not flat — it is involute-shaped, curved, with varying thickness depending on where on the tooth flank the measuring pressure lands. A flat measuring face can never give a repeatable tooth thickness measurement. Something quite different is needed.

What a gear tooth micrometer does differently

The digital gear tooth micrometer with a measuring range of 125–150 mm is built with one specific purpose: to measure the tooth thickness of cylindrical gears with guaranteed repeatable contact at the tooth’s centerline. The core of the design is the Ø30 mm disc-shaped measuring faces — not flat, not pointed, but flat circular surfaces. The discs act as a kind of “measuring wafer” that seats against the sides of the tooth and finds its own center regardless of the tooth’s angle. Whether you hold the micrometer slightly tilted or not, the discs give the same reading because they always contact the tooth at the same geometric reference point.

Digital gear tooth micrometer 125-150 mm with Ø30 mm disc faces

What tooth thickness technically means

On a gear, the designer specifies “chordal thickness” — the distance measured along a chord across the tooth at a specific reference circle, typically the pitch circle. This measurement is what determines whether the gear achieves the correct backlash with its mating gear, and thus whether it runs without slack in either direction. The tolerance is typically ±0.02 to ±0.05 mm depending on the gear’s class and application — small figures, which a gear tooth micrometer with ±0.009 mm accuracy is designed to deliver.

The alternative — measurement using span (tooth-to-tooth) or “over pins” methods (measuring pins placed between teeth) — requires calculation tables and is inconvenient for workshop use. A direct tooth thickness measurement with disc-shaped measuring faces is the practical method when you’re standing at the bench.

Practical features

Absolute-encoder digital readout with 0.001 mm resolution — meaning there is no zero loss when changing the battery. The instrument remembers its own position and can be read immediately, saving time on routine work.

Ratchet stop provides repeatable contact force. Without it, different operators would apply different measuring pressure, producing different readings on the same tooth. The click mechanism ensures every measurement is made with the same force.

ABS/INC switch makes it possible to zero within a measuring range and measure relative to a reference value. Useful when many identical gears need to be verified in series.

Non-rotating spindle prevents the measuring faces from “smearing” the tooth as the spindle closes — important for hardened gears where the surface finish must be preserved.

Heat-insulated frame reduces the effect of the operator’s hand warmth during measurement. The measurement must be completed within a few seconds, and thermal expansion from the hands can create measurement deviations of several micrometers on an ordinary micrometer.

Where the micrometer is used in practice

Gear manufacturing: Quality control of finished gears before packaging. Every production batch requires spot-checking of tooth thickness on a number of teeth to verify that production stays within spec.

Gearbox and transmission service: When overhauling gearboxes, the first measurement is often the tooth thickness of worn gears, to determine whether they can be reused or must be replaced. A worn tooth is thinner than a new one — and the difference is what the gear tooth micrometer measures directly.

Watchmaking and precision mechanics: Even though watch gears are typically smaller than 125 mm, the same principle applies: if the tooth thickness is out of tolerance, the watch won’t run. Corresponding micrometer models are available for smaller measuring ranges.

Wind turbine service: Main gearboxes in wind turbines can contain gears weighing several tons. Verifying tooth thickness on spare parts before installation is a standard procedure at larger wind farms.

Industrial machine service: Reduction gears, worm gears, roller presses — all contain gears that wear. Diagnosis based on actual tooth thickness measurement is more reliable than visual assessment.

Education and technical colleges: Gear measurement is a classic exercise in metrology courses. The instrument is the standard setup that technicians learn to use from the start of their training.

What you get for the money

Measuring range 125–150 mm, ±0.009 mm accuracy, 0.001 mm resolution, absolute-encoder digital display, Ø30 mm stainless steel disc faces (HRC52-54), Ø8 mm non-rotating spindle, ratchet stop for repeatable contact force, mm/inch switch, ABS/INC selectable, auto power-off, zero/preset function, heat-insulated frame, supplied in a plastic case.

DKK 2,666 is an investment that a gear systems workshop, an overhaul specialist, or a manufacturing company with gears in its production program will earn back on just a few jobs. For smaller workshops, it is often what makes it possible to take on jobs that would otherwise have to be sent to a gear center.

Read more: Digital gear tooth micrometer 125–150 mm in the shop →

More news

All news