Published 13 October 2026 at 21:41
Most people in a production kitchen or a quality laboratory will recognize this: 4 °C was measured in a batch at 2 p.m., and the logbook shows a nice figure. But what happened at 3 p.m., 4 p.m. and overnight? If a customer or a food inspector asks, all you have is a single reading and an assumption that the rest went well.
What is a ThermaData logger
The ETI ThermaData stainless steel is a data logger in a food-grade 316 steel housing with a fixed penetration probe of Ø4.5 × 150 mm. The measuring range is -20 to +125 °C with a resolution of 0.1 °C and an accuracy of ±0.5 °C. The housing is rated IP66/67, so the logger withstands washing, condensation and water. The memory holds 16,000 readings, and data is transferred via USB-C with the included 1-meter cable.
What problems does it solve
The logger replaces the manual spot check with a continuous record. With the ThermaData Hub software, you set the measuring interval from 1 second to 255 minutes, a delayed start of up to 23 hours and 59 minutes, and high and low alarm values. After download, you get an automatic PDF summary that can be filed directly in your self-monitoring records. Max/min values are shown, so a brief excursion does not disappear into an average.
When and why it is used
The logger is used where the temperature profile over time needs to be documented and where nobody can stand by the meter all the time. The long probe can be inserted into the core of the product, so you measure what is actually decisive, not the surface or the air around the product.
Three concrete situations
Cooling in a production kitchen. A pot of sauce or a tray of cooked meat must be cooled below a given temperature within a specific time. The logger sits in the core and shows the entire cooling curve, not just the start and end temperatures.
Cold chain and transport. The logger follows a shipment or a pallet through the warehouse and truck. On receipt it is read out, and any temperature excursion can be pinpointed in time.
Heat treatment and pharmaceuticals. With a range up to 125 °C, the logger can document pasteurization, hot holding or processes in a pharmaceutical or laboratory environment. For applications where the ambient temperature must be detected quickly, for example in dishwashers, the series is also available in a Ø1.8 × 20 mm fast-response probe variant.
The economics
The gain lies in time and in risk. An employee who would otherwise have to read and note values at fixed intervals can do other work while the logger does its job. And a batch that is documented to be within limits can be released without discussion, whereas an unexplained deviation could otherwise cost an entire production run to be discarded or retested. If the measurements need to be traceable, a UKAS 3-point calibration certificate can be added as an option.
See the logger
If you need documented core temperatures without manual readings, the ThermaData stainless steel is a solid starting point.