Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustThe pipe wall looks intact from the outside, but how much steel is left inside?Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustThe pipe wall looks intact from the outside, but how much steel is left inside?
Item number 53-MA61

True RMS 60A AC Clamp Meter + Ncv

2.022 DKK

In stock

Compact clamp meter with non-contact switch, voltage detector, and variable frequency control

Request a quote 53-MA61

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Features

  • MA61 True RMS 60A AC clamp meter + NCV
  • True RMS for accurate readings of noisy, distorted, or non-sinusoidal waveforms
  • AC and relative function
  • Compact 0.7″ (17mm) jaw size enables measurements in tight spaces
  • Variable Frequency Control (VFC): low-pass filter for accurate measurement of variable frequency signals
  • Built-in Non-Contact Voltage (NCV) detector
  • Complete range of overload protection
  • 6000 count backlit LCD display
  • Data Hold locks the reading on the display
  • Low battery indicator and automatic power-off
  • CAT II 600V and CAT III 300V safety ratings

Selection of AC or AC/DC current, both with high ±2% accuracy. Manual range clamp meter with three current ranges. The 6000mA range allows for low current measurements, which can be used in the automotive industry. Unique VFC (Variable Frequency Control) helps to troubleshoot and diagnose HVAC applications that are variable frequency driven.

The MA61 measures AC current, while the MA63 handles both AC and DC current. Both meters also measure AC/DC voltage, frequency, resistance, capacitance, diode, and continuity.

The mini clamp meter measures current in three AC ranges: 600mA, 6000mA, and 60A. The MA63 measures DC current in two ranges: 6000mADC and 60ADC.

The clamp meter offers advanced features, including NCV (Non-Contact Voltage) detection and VFC (Variable Frequency Control), which inserts a low-pass filter into the measurement.


Meter Description

  1. Clamp jaws
  2. Measured conductor
  3. NCV Non-Contact Voltage Detector lamp
  4. FUNCTION SELECT button
  5. Mode button
  6. LCD display
  • Input probe terminal
  • Positive lead pin
  • REL (relative) button on MA61; Zero button on MA63
  • Display holder / Backlight button
  • Aperture release open/close
  • Function description

    1. NCV: Non-contact voltage detector
    2. 60A AC measurements
    3. 600mAACMeasurements
    4. 6000mAAC measurements
    5. Resistance, diode, continuity and capacitance measurements
    6. AC or DC voltage and frequency
    7. POWER OFF selection
    8. Function selector dial
    9. NCV: Non-contact voltage detector
    10. 60A AC with frequency or DC measurements
    11. 600mA AC with frequency or DC measurements
    12. 6000mA AC with frequency or DC measurements
    13. Resistance, diode, continuity and capacitance measurements
    14. AC or DC voltage and frequency measurements
    15. POWER OFF selection
    16. Function selector dial
    Specification

    Features

    • MA61 True RMS 60A AC clamp meter + NCV
    • True RMS for accurate readings of noisy, distorted, or non-sinusoidal waveforms
    • AC and relative function
    • Compact 0.7″ (17mm) jaw size enables measurements in tight spaces
    • Variable Frequency Control (VFC): low-pass filter for accurate measurement of variable frequency signals
    • Built-in Non-Contact Voltage (NCV) detector
    • Complete range of overload protection
    • 6000 count backlit LCD display
    • Data Hold locks the reading on the display
    • Low battery indicator and automatic power-off
    • CAT II 600V and CAT III 300V safety ratings

    Selection of AC or AC/DC current, both with high ±2% accuracy. Manual range clamp meter with three current ranges. The 6000mA range allows for low current measurements, which can be used in the automotive industry. Unique VFC (Variable Frequency Control) helps to troubleshoot and diagnose HVAC applications that are variable frequency driven.

    The MA61 measures AC current, while the MA63 handles both AC and DC current. Both meters also measure AC/DC voltage, frequency, resistance, capacitance, diode, and continuity.

    The mini clamp meter measures current in three AC ranges: 600mA, 6000mA, and 60A. The MA63 measures DC current in two ranges: 6000mADC and 60ADC.

    The clamp meter offers advanced features, including NCV (Non-Contact Voltage) detection and VFC (Variable Frequency Control), which inserts a low-pass filter into the measurement.


    Meter Description

    1. Clamp jaws
    2. Measured conductor
    3. NCV Non-Contact Voltage Detector lamp
    4. FUNCTION SELECT button
    5. Mode button
    6. LCD display
  • Input probe terminal
  • Positive lead pin
  • REL (relative) button on MA61; Zero button on MA63
  • Display holder / Backlight button
  • Aperture release open/close
  • Function description

    1. NCV: Non-contact voltage detector
    2. 60A AC measurements
    3. 600mAACMeasurements
    4. 6000mAAC measurements
    5. Resistance, diode, continuity and capacitance measurements
    6. AC or DC voltage and frequency
    7. POWER OFF selection
    8. Function selector dial
    9. NCV: Non-contact voltage detector
    10. 60A AC with frequency or DC measurements
    11. 600mA AC with frequency or DC measurements
    12. 6000mA AC with frequency or DC measurements
    13. Resistance, diode, continuity and capacitance measurements
    14. AC or DC voltage and frequency measurements
    15. POWER OFF selection
    16. Function selector dial
    PDF (2)
    Reviews (0)

    There are no reviews yet.

    Be the first to review

    Your e-mail address is not published.

    Your rating *