Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trust
Item number 17-294900

ETI ThermaData® stainless steel temperature logger with internal sensor. Handles -20 to +125°C. Waterproof. Connection via USB-C

1.414 DKK

In stock

ThermaData Pro stainless steel data logger – perfect for food, pharmaceutical and other high-temperature applications.

Integrated USB interface for setup and download
Automatic PDF summary
High temperature range -20 to 125 °C
6 available probe options
IP66/67 waterproof
UKAS 3-point certificate available at an extra cost

Request a quote 17-294900

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: ,

Description

Stainless Steel Pro ThermaData data loggers are ideal for food, pharmaceutical, and other applications where a high-temperature data logger is required. The stainless steel ThermaData logger is housed in waterproof, food-grade 316 stainless steel to protect the logger against corrosion, impact, and moisture (IP66/67).
The ThermaData Hub software allows the user to program the logging sample/interval rate (1 second to 255 minutes), real-time clock, °C/°F, delayed start (maximum 23 hours, 59 minutes), software start, temperature start or timed start, and a 31-character user ID. The user can also set high and low alarm values for a specific application.
The Stainless Steel Pro is available in six options:

without probe
Ø3.3 x 50 mm penetration probe
Ø4.5 x 100 mm
Ø4.5 x 150 mm
Ø4.5 x 200 mm penetration probe
Ø1.8 x 20 mm fast response probe

In addition to the five standard options, there is also a Ø1.8 x 20 mm fast response probe variant that is ideal for applications requiring a fast ambient reading, i.e., dishwashers. Each logger is supplied with a one-metre USB-C cable.
USB connection point: Simply unscrew the end cap to access the USB-C connector and plug in the included USB-C cable. This allows the user to connect the logger to a PC and upload all collected data.

Specifications

Measuring range: -20 to 125 °C
Max/Min: Yes
Resolution: 0.1 °C
Accuracy: ±0.5 °C
Memory: 16,000 readings
Sample rate: 1 to 255 minutes
Battery: 3.6 volt 2/3 AA lithium
Battery life: Minimum 3 years
Dimensions: 22.5 x 129 mm (excl. probe)
Weight: 170 grams nominal – model dependent
Case material: Stainless steel
Country of manufacture: United Kingdom
Warranty: two years
Water/dust resistance: IP66/67 protection
Measurement scale: Celsius/Fahrenheit
OS: Windows
Additional information
Product type

Temperatur Datalogger

Probe depth

internal sensor

Tilbehør Andet

17-8902402,17-8902403

Wireless

Waterproof

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *

Tilbehør Andet

ETI Calibration Certificate UKAS, 2 points for temperature loggers with internal probe (0, +40°C)
17-8902402
974 DKK
Lägg i varukorgen
ETI Calibration Certificate UKAS, 3 points for Internal Sensor Logger Certificate (-18, 0, +40°C)
17-8902403
1.104 DKK
Lägg i varukorgen