Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trust
Item number 76-1502990-040

Compact Dry XSA – for Staphylococcus Aureus – 40 test plates per pack, 38210000, Japan

671 DKK

In stock
  • Clear and easy-to-use portable plate: No medium preparation is required, eliminating waste of medium as well as the need for sterilization equipment to prepare the medium.
  • Detection of colonies on the plate is simple and clear.
  • Individual colonies on the plate can be isolated for further identification tests
Request a quote 76-1502990-040

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Compact Dry X-SA is a simple and safe test method for detecting and quantifying Staphylococcus aureus. These are spherical bacteria that are typically arranged in clusters under the microscope. Their potential pathogenicity stems from their ability to produce enterotoxins (SET), which accumulate in food when contaminated and cannot be completely inactivated even by heat treatment. Food contamination with S. aureus almost always originates from humans (hands, sneezing, coughing). S. aureus is therefore also considered an indicator of inadequate personal hygiene


Incubation time and temperature: 24 ± 2 hours at 35 ± 2 °C, AOAC recommendation 35 ± 2 °C, NordVal /MicroVal recommendation 37 ± 1 °C
Shelf life: Room temperature (+ 1 to + 30 °C)
Storage: 21 months after manufacture


Sample preparation Viable count

in water or liquid food
Dispense 1 ml of sample (dilute if necessary) onto the center of the Compact Dry plate.

Viable count in solid food
Add buffer solution to the sample and homogenize with a Stomacher®. Dispense 1 ml of sample (dilute if necessary) onto the center of the dry pad on the Compact Dry plate.

Viable count in swab test samples
Use a cotton swab to wipe the surface, insert it into the unit with the elution solution. Dispense 1 ml of elution solution (dilute if necessary) onto the center of the Compact Dry plate. It is recommended to use Swab for Compact Dry offered by HyServe ID no. 1 002 952/3 (40/240 pieces).

Test instructions

Open the lid and dispense 1 ml of sample onto the center of the Compact Dry plate.
The sample automatically and evenly diffuses into the pad, converting the dry pad into a gel within seconds.
Replace the lid on the plate and write the required information in the memo section.
Invert the covered plate and place it in the incubator.
After incubation, count the number of light blue/blue colonies. White paper placed under the plate helps in counting the colonies.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *