Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trust
Item number 64-516157

Mitutoyo Micrometer Inspection Set, Ceramic Gauge Blocks Class 1, for Micrometer Inspection per DIN 863, 10 Special Gauge Blocks and Plane-Parallel Optical Flat, Nominal Sizes 2.5-5.1-7.7-10.3-12.9-15.0-17.6-20.2-22.8-25.0 mm, incl. Plane-Parallel Optical Flat ø30×12 mm, Micrometers with measuring range over 25 mm can be inspected with extra gauge block 25/50/75 mm, supplied in wooden case with manufacturer’s calibration certificate

7.714 DKK

In stock

This complete measuring set includes ceramic calibration rings in M10 size, compliant with the ISO 3650/1 standard. Ideal for high-precision measurements in the mechanical industry. The rings provide exact reference dimensions for calibrating measuring instruments and for quality control of threaded components. The set is supplied in a protective storage box.

Request a quote 64-516157

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Mitutoyo micrometer inspection set, ceramic, grade 1 is a Mitutoyo precision instrument from the ECONOMY series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Hardened and ground reference surfaces provide repeatable measurements; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

Material: ceramic. Grade 1. Hardened and ground reference surfaces and contact points for repeatable measurements; matched to Mitutoyo precision quality class. The instrument integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, and perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification. Document with a calibration certificate. The instrument’s design supports both one-off inspections and back-to-back QC workflows; its hardened reference surfaces withstand wear from regular workshop use over years of service.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurements, calibration lab reference work, and QC workflows within the Mitutoyo product line where this instrument’s specific role is applicable. The GAUGE BLOCK ACCESSORIES category is the standard workshop tool for measurement/reference tasks.

Features

  • Mitutoyo micrometer inspection set, ceramic, grade 1
  • Material: ceramic
  • Grade 1
  • Hardened, ground reference surfaces for repeatable measurements
  • Mitutoyo build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications

Specifications

Manufacturer Mitutoyo
Type Mitutoyo micrometer inspection sets
Material ceramic
Grade 1
SKU 64-516157

Compatible accessories

Compatible accessories: Mitutoyo setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) at initial delivery and periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Mitutoyo protective cases and bench storage; Mitutoyo spare parts and consumables where applicable.

Additional information
Weight 0,857 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *