Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure against
Item number 64-855626

Lever-type dial test indicator with changeable measuring direction, parallel, dial diameter Ø35 mm, measuring range 1 mm

1.352 DKK

In stock

Lever-type dial test indicator with changeable measuring direction
Parallel
Dial diameter Ø35 mm
Measuring range 1 mm

Request a quote 64-855626

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

A lever-type dial test indicator is a dial gauge with an angled probe lever. It is used to check flatness, run-out and parallelism on surfaces that a standard dial gauge cannot reach. The measuring direction of this model can be changed, so the lever can be adapted to the measuring task.

Typical workshop uses are aligning workpieces in machines and inspection on the measuring table.

  • Type: lever-type dial test indicator, parallel
  • Changeable measuring direction
  • Dial diameter: Ø35 mm
  • Measuring range: 1 mm
Additional information
Weight 0,145 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *