Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trust
Item number 64-834586

Thread pair for thread measurement, micrometers with measuring face Ø8 mm, thread diameter 0.725 mm, metric pitch 1.25 mm, Whitworth 22-20-19 threads per inch, UN/UNC/UNF 20 threads per inch

1.508 DKK

In stock

Measuring rods with a diameter of 0.725 mm for precise measurement of threads and gears. The set includes precision-manufactured threads with a distance of 8.00 mm between the surfaces, providing accurate results for metric measurements. Perfect for industrial applications where precision is critical.

Request a quote 64-834586

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Thread measuring wire ø8 mm is a precision-ground tool steel wire used in the three-wire method to verify the pitch diameter of a screw thread. The three-wire method provides a more accurate pitch diameter than direct reading with a thread micrometer — three wires of identical diameter (maintained as a matched set in the inspection laboratory) create a measurement geometry that cancels out first-order errors.

Wire diameter ø8 mm. Lapped to tight tolerance, hardened, and supplied with documented diameter calibration. Use a matching thread micrometer or universal micrometer for the actual measurement step.

Usage: Select three wires with a diameter matched to the thread pitch (the manufacturer’s table provides the correct wire diameter for a specific thread pitch). Place two wires in adjacent grooves on one side of the thread and one on the opposite side. Measure over the wires with a standard outside micrometer. Apply the three-wire formula: pitch diameter = M − 3w + 0.866p (where M is the over-wire reading, w is the wire diameter, and p is the thread pitch).

Common applications: Thread QC inspection in machine shops performing screw machining, calibration lab thread form verification, line-side QC on thread cutting operations, and all applications where direct thread micrometer readings need to be verified against the more accurate three-wire reference.

Features

  • Thread measuring wire ø8 mm
  • Hardened, ground reference surfaces for repeatable measurement
  • Schut build quality
  • Suitable for workshop QC, calibration labs, and bench measurement applications
  • SWISS MADE series

Specifications

Manufacturer Schut
Series SWISS MADE
Type Thread measuring wires
Article number 64-834586

Compatible accessories

Compatible accessories: Schut setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificate (ISO 17025) at initial delivery and for periodic verification — typically a 12-month interval for production floors, 6 months for high-volume lines; Schut protective cases and bench storage; Schut spare parts and consumables where applicable.

Additional information
Weight 0,009 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *