Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trust
Item number 64-779289

Tesa vernier caliper with analog dial indicator 0-150 mm, graduation 0.02 mm, 1 revolution = 2 mm

1.425 DKK

In stock

Precision measuring tool with a measuring range of 0-150mm and a clear dial for exact measurements. This analog vernier caliper is ideal for precise dimensional measurement in workshops and production environments. Excellent for both internal and external measurements with high reading accuracy. A reliable instrument for anyone requiring exact measurement results.

Request a quote 64-779289

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

TESA dial calipers are a TESA precision instrument from the ECONOMY LINE series — used for workshop measurement, inspection, and reference work in machine shop and manufacturing environments. Measuring range 0-150 mm. Hardened and ground reference surfaces provide repeatable measurement; the instrument is designed for handheld or fixture-mounted use depending on the workshop application.

ECONOMY LINE build quality. Graduation 0.02 mm, 1 revolution = 2 mm. Hardened and ground reference surfaces and contact points for repeatable measurement; matched to TESA precision quality class. The instrument integrates with standard inspection workflows in metrology labs and machine shop QC stations.

Usage: position the instrument against the workpiece’s reference surface or feature, perform the measurement according to the instrument’s standard procedure (depending on type — direct reading, comparative deviation, go/no-go verification, or wrung-stack reference). Zero-verify against a setting standard during periodic verification. Document with a calibration certificate. The instrument’s design supports both one-off inspection and back-to-back QC workflows; its hardened reference surfaces withstand wear from regular workshop use over years of service.

Common applications: workshop incoming inspection of components, on-machine setup checks, fitter and toolmaker bench measurement, calibration lab reference work, and QC workflows within the TESA product line where this instrument’s specific role is applicable. The CALIPERS category is the standard workshop tool for measurement/reference tasks.

Features

  • TESA dial calipers
  • Measuring range 0-150 mm
  • Graduation 0.02 mm, 1 revolution = 2 mm
  • Hardened, ground reference surfaces for repeatable measurement
  • TESA build quality
  • Suitable for workshop QC, calibration lab, and bench measurement applications
  • ECONOMY LINE series

Specifications

Manufacturer TESA
Series ECONOMY LINE
Type TESA dial calipers
Measuring range 0-150 mm
Graduation 0.02 mm, 1 revolution = 2 mm
Article number 64-779289

Compatible accessories

Compatible accessories: TESA setting standards and reference standards for periodic verification of accuracy at known dimensions; calibration certificates (ISO 17025) at first delivery and periodic verification — typically 12-month interval for production floors, 6-month for high-volume lines; TESA protective cases and bench storage; TESA spare parts and consumables where applicable.

Additional information
Weight 0,369 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *