Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trust
Item number 17-830500

ETI Probe Holder, Steel Clamp with 3.3 mm Hole

39 DKK

In stock

Probe holder clamps for bimetal thermometers. 

  • Supplied complete with mounting clamp
  • Holds probes securely in place
  • Two sizes – Ø3 / Ø3.3 mm shaft diameter
  • Or Ø4 mm probe stem diameter
  • Clamp size: 3.3 or 3 mm
Request a quote 17-830500

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Probe clamps for thermometers – These stainless steel probe holders clamp onto the top of a kettle or similar container to secure a temperature probe in place. Two models are available: one that accepts either a Ø3 or Ø3.3 mm probe stem, and another designed to work with a bimetal thermometer, accepting a Ø4 mm probe stem. To ensure maximum accuracy when taking readings, the probe should not touch the bottom or sides of the container.

Additional information
Product type

Stativ & Beslag

Clamping size

3 or 3 mm

Category

Product type

Wireless

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *