Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 17-891512

ETI Fridge & Freezer Thermometer ThermaGuard® 102, with 2 external probes, each with 2-metre cable. Includes UKAS calibration certificate for -18, 0°C

1.151 DKK

In stock

ThermaGuard high-accuracy fridge temperature monitoring thermometers

Two models available – single or dual external probes
Complies with European standard EN 13485
2-point (-18, 0 °C) UKAS calibration certificates available
Programmable high and low audible alarms
Records max/min temperature

UKAS options are not available for next-day delivery as certified at the time of ordering

Request a quote 17-891512

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , ,

Description

The ThermaGuard fridge thermometer is a high-accuracy fridge/freezer thermometer available in two models to suit different sensor requirements. Essential for food safety, the max/min, alarm, and CalCheck functions make this model an excellent choice for HACCP compliance.
The internal sensor (101 model only) measures temperature across the range of -19.9 to 49.9 °C, while the external sensors measure over the range of -39.9 to 49.9 °C. Both offer an accuracy of ±0.4 °C and a resolution of 0.1 °C/°F.
With a battery life of 25,000 hours (normal use, without alarm), the 1.5-volt AA batteries only need replacing every 34 months. 
The digital fridge thermometer is housed in a splashproof IP54, ABS case, which features a large LCD display simultaneously showing the current and max/min recorded temperatures. Both models also feature programmable alarms to provide an audible warning if the fridge or freezer temperature falls outside the safe limits you set.
Each ThermaGuard is . 
An optional two-point (-18, 0 °C) UKAS calibration certificate is available. Each certificate indicates deviations from standards at -18 and 0 °C. *UKAS certificate applies to remote probes only.
Two models available
ThermaGuard 101 incorporates two temperature sensors: a remote waterproof temperature probe with a two-metre PVC lead for monitoring appliance temperature, and an internal sensor for room temperature.
ThermaGuard 102 incorporates two remote waterproof probes, both with two-metre PVC leads for monitoring two appliances. Each remote probe can be mounted on the internal wall of the fridge using the small ABS plastic mounting bracket supplied. 
CalCheck function
Both ThermaGuard models feature a CalCheck 0.0 °C (±0.1 °C) function that allows the user to verify the accuracy of the thermometer at any time, providing confidence that the measurements are correct.
Free wall bracket
Each ThermaGuard is supplied with a plastic wall bracket that incorporates a built-in foot stand, hanging hook, and screw thread for tripod mounting, allowing users to safely store or position the unit and protect it against accidental damage.

Specifications

Internal range: -19.9 to 49.9 °C (101 model only)
External range: -39.9 to 49.9 °C
Max/Min: Yes
Resolution: 0.1 °C/°F
Accuracy: ±0.4 °C
Alarm: Yes
Battery: 2 x 1.5 Volt AA
Battery life: 25,000 hours (normal use, without alarm)
Sensor type: Thermistor
Dimensions: 29 x 73 x 96 mm
Weight: 165 grams
Country of manufacture: United Kingdom
Warranty: two years
Certification: optional UKAS calibration certificate available
Conforms to standard: EN 13485
Additional information
Product type

Temperatur Datalogger

Model

102 & UKAS 2-point (-18, 0°C)

Tilbehør Beskyttelse & Opbevaring

17-830880,17-832590,17-830800

Category

PDF (3)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *

Tilbehør Beskyttelse & Opbevaring

ETI Silicone Cover – Black, Fits ThermaGuard® and ThermaQ® Wi-Fi Thermometers
17-830880
141 DKK
Lägg i varukorgen
ETI Wall Mount with Base for ThermaGuard®
17-832590
47 DKK
Lägg i varukorgen
ETI Magnetic Base suitable for, among others, BlueTherm One®, ThermaGuard®, etc.
17-830800
94 DKK
Lägg i varukorgen