Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%A thermometer reading 72 °C could be several degrees off: how to check it in a few minutesWhen temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trust
Item number 56-TB-3040SI

TandD Thermal Buffer Mount (10-pack) — dampens temperature variations around the probe, e.g., for refrigeration/freezer monitoring

2.607 DKK

In stock

TandD Thermal Buffer Mount (10-pack) — dampens temperature variations around the probe, e.g., for refrigeration/freezer monitoring

Request a quote 56-TB-3040SI

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , , , , , , ,

Other models in the series 16

Description

The 56-TB-3040SI is a thermal buffer mount — an aluminum block in which the probe is placed to simulate thermal mass. This results in more stable readings, as intermittent disturbances (brief drafts, opening a cold room door, short-term solar exposure) have less impact on the measurement. Selected for refrigeration/freezer monitoring where you want to see the “true” temperatures of stored goods, rather than temporary air fluctuations. Supplied in a 10-pack.

Additional information
Product type