Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can Trust
Item number 78-1002650-001

Checklite HS Kit for highly sensitive microbial biomass analysis for 100 determinations

3.696 DKK

In stock
  • Easy to use
  • Fast performance
  • Highly sensitive microbial biomass analysis
  • Detects 1000 cells of coliform bacteria/ml (100 cells/analysis)
  • Contains specially designed ATP-degrading enzymes
Request a quote 78-1002650-001

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

78-1002650-001 Test hygiene > Checklite

The CheckLite HS Set is a kit for the analysis of microbial biomass based on the ATP measurement method. It contains thermostable firefly luciferase and ATP-degrading enzymes developed by Kikkoman Corp. The bioluminescence reagent contains firefly luciferin and luciferase. Luciferase reacts specifically with ATP and catalyzes the reaction to produce bioluminescence. This bioluminescence is directly proportional to the amount of ATP in the sample.
All living cells have ATP as an energy source. Therefore, the total cell mass can be determined by measuring the bioluminescence via the luciferase reaction, after extracting ATP from the cells using the ATP-releasing reagent in this kit.

1 x 100 analyses


Test duration: 60-90 minutes (including calibration curve)
Storage: 2-8 °C, DO NOT FREEZE
Kit Composition:
Luciferin-luciferase reagent HS: (2 bottles dark green marked)
Reconstitution buffer
ATP-releasing reagent


ATP-eliminating reagent
Reconstitution buffer for ATP-eliminating reagent; (5.5 ml x 2 vials yellow marked)

The concentration of ATP in living cells changes rapidly. Therefore, extract ATP from cells or freeze the cells immediately after sampling. Even during extraction, it may be necessary to inhibit or destroy ATP-degrading enzymes to prevent the enzymes from reducing the ATP concentration.
Prepare the bioluminescence and ATP-elimination reagents according to the manual. After preparing the samples, mix the reagent and samples to start the reaction.
By measuring the bioluminescence in a luminometer, such as the recommended C-110, the level of ATP can be determined. These results can be quantified by plotting against a prepared standard curve. The number of microbial cells (colony-forming units, CFU) can be obtained based on the correlation between the amount of ATP and the number of CFU counted in advance using the traditional colony counting method.
For more information, see the manual.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *