Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure against
Item number 82-OKU-I-150X

Interchangeable Eyepieces (inch) for Peak Lupe Microscope

1.089 DKK

In stock
Request a quote 82-OKU-I-150X

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 16

Description

82-OKU-I-150X Accessories > Eyepieces and lenses for Peak-Lupe and Cellcheck

Peak Lupe Interchangeable eyepieces for 2034 & 2054 microscopes with inch graduations. All eyepieces have a magnification of 10x. The built-in scale is calculated to match the lens magnification. The scale can be focused separately within the eyepiece. The eyepiece is already included with the stand microscope ordered, so order these only to have additional magnification or as a replacement.

Select the magnification to order the correct eyepiece

Eyepiece scale To match Magnification
0,005 ” 20x
0,002 ” 40x
0,001 ” 60x
0,0005 ” 100x
0,0002 ” 150x
0,0001 ” 200x
Additional information
Product type

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *