Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure against
Item number 64-855622

Lever-type dial test indicator, dial diameter Ø35 mm, measuring range 0.28 mm, measuring force 0.1 N

1.250 DKK

In stock

Lever-type dial test indicator
Dial diameter Ø35 mm
Measuring range 0.28 mm
Measuring force 0.1 N

Request a quote 64-855622

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

A lever-type dial test indicator is a measuring instrument with a pivoting stylus lever, used in the workshop to check deviations in form and position. It is suited to places where a standard dial gauge cannot reach, for example when aligning workpieces in a machine, checking flatness and checking runout.

The dial diameter is Ø35 mm, the measuring range is 0.28 mm and the measuring force is 0.1 N.

  • Dial diameter: Ø35 mm
  • Measuring range: 0.28 mm
  • Measuring force: 0.1 N
Additional information
Weight 0,139 kg
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *