Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 53-407766-NIST

Sound Calibrator 94dB and 114dB, with traceable calibration certificate 407.766

7.641 DKK

In stock

1kHz Professional calibrator for 0.5

Request a quote 53-407766-NIST

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: ,

Description
  • Calibrates and verifies the correct operation of sound level meters
  • LED indicator shows that the battery level is OK for a correct signal
  • 2 level settings to select 94dB or 114dB
  • For use with sound level meters equipped with 0.5″ or 1.0″ microphones
  • Durable die-cast aluminum housing
  • 1 kHz sine wave at 94dB/114dB is generated with an accuracy of 5% (frequency) and ±0.8dB
Specification
  • Calibrates and verifies the correct operation of sound level meters
  • LED indicator shows that the battery level is OK for a correct signal
  • 2 level settings to select 94dB or 114dB
  • For use with sound level meters equipped with 0.5″ or 1.0″ microphones
  • Durable die-cast aluminum housing
  • 1 kHz sine wave at 94dB/114dB is generated with an accuracy of 5% (frequency) and ±0.8dB
PDF (3)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *