Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can Trust
Item number 53-EMF300

Microwave Oven Leakage Detector

2.315 DKK

In stock
Request a quote 53-EMF300

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

Features

  • EMF300 Microwave Oven Leakage Detector
  • 0 to 1.999mW/cm 2 measurement range
  • Audible alarm if level is >1mW/cm 2
  • 2.45GHz
  • EMF values from 30MHz to 3GHz can also be measured for reference only
  • Peak hold function captures highest value
  • Out of range indicator
  • Dimensions: 6 x 2.7 x 1.4 inches (152 x 69 x 36.3mm)
  • Weight: 7oz (202g)
  • Complete with 9V battery


AC Instruments EMF300 Microwave Oven Leakage Detector.

Easy-to-use, compact micro-leakage detector for measuring high-frequency radiation emitted from household and commercial microwave ovens.

Pocket-sized microwave oven leakage detector helps ensure safety around microwave ovens

Microwave ovens are found everywhere – in homes, workplaces, convenience stores, dormitories, cafeterias, hotel rooms, restaurants, kitchens, the list goes on. These reliable ovens quickly heat and prepare food. While they are usually trouble-free, repeated use, especially in commercial or public environments, can accelerate wear that potentially compromises the oven’s ability to contain microwaves. There is cause for concern about excess microwave leakage from ovens if the hinges, locks, or seals are damaged. Sometimes such damage is not obvious and leakage can occur without the users’ knowledge. Many microwave testing devices are sold to consumers. Choose one you can trust. Use the AC Instruments EMF300 to safely and routinely measure oven leakage with greater accuracy to ensure safe operation.

The EMF300 is specifically designed for measuring high-frequency radiation levels emitted from both household and commercial microwave ovens, providing readings in the 0 to 1.999mW/cm2 measurement range. When values are abnormally high (>1mW/cm²), an alarm sounds and a status indicator is displayed. To capture high measurement values, the Peak hold function records peaks for reference. When the EMF300 microwave detector identifies radiation leaking out, it is often as a result of worn or broken parts in the microwave oven. Common issues include bent, worn, or improperly closed doors, cracks in hinges or seals, and dents or cracks in the door.


Who uses the EMF300?

  • Commercial and consumer appliance service/repair technicians
  • Occupational health/safety
  • Maintenance technicians
  • Consumers / DIY / handyman
  • Researchers

EMF300: A quick look

  • Microwave oven leakage detector / meter
  • For professional or consumer ovens
  • Easy to use
  • Audible alarm and visual over-limit indicator
  • Peak hold captures highest reading
  • Pocket-sized
Specification

Features

  • EMF300 Microwave Oven Leakage Detector
  • 0 to 1.999mW/cm 2 measurement range
  • Audible alarm if level is >1mW/cm 2
  • 2.45GHz
  • EMF values from 30MHz to 3GHz can also be measured for reference only
  • Peak hold function captures highest value
  • Out of range indicator
  • Dimensions: 6 x 2.7 x 1.4 inches (152 x 69 x 36.3mm)
  • Weight: 7oz (202g)
  • Complete with 9V battery


AC Instruments EMF300 Microwave Oven Leakage Detector.

Easy-to-use, compact micro-leakage detector for measuring high-frequency radiation emitted from household and commercial microwave ovens.

Pocket-sized microwave oven leakage detector helps ensure safety around microwave ovens

Microwave ovens are found everywhere – in homes, workplaces, convenience stores, dormitories, cafeterias, hotel rooms, restaurants, kitchens, the list goes on. These reliable ovens quickly heat and prepare food. While they are usually trouble-free, repeated use, especially in commercial or public environments, can accelerate wear that potentially compromises the oven’s ability to contain microwaves. There is cause for concern about excess microwave leakage from ovens if the hinges, locks, or seals are damaged. Sometimes such damage is not obvious and leakage can occur without the users’ knowledge. Many microwave testing devices are sold to consumers. Choose one you can trust. Use the AC Instruments EMF300 to safely and routinely measure oven leakage with greater accuracy to ensure safe operation.

The EMF300 is specifically designed for measuring high-frequency radiation levels emitted from both household and commercial microwave ovens, providing readings in the 0 to 1.999mW/cm2 measurement range. When values are abnormally high (>1mW/cm²), an alarm sounds and a status indicator is displayed. To capture high measurement values, the Peak hold function records peaks for reference. When the EMF300 microwave detector identifies radiation leaking out, it is often as a result of worn or broken parts in the microwave oven. Common issues include bent, worn, or improperly closed doors, cracks in hinges or seals, and dents or cracks in the door.


Who uses the EMF300?

  • Commercial and consumer appliance service/repair technicians
  • Occupational health/safety
  • Maintenance technicians
  • Consumers / DIY / handyman
  • Researchers

EMF300: A quick look

  • Microwave oven leakage detector / meter
  • For professional or consumer ovens
  • Easy to use
  • Audible alarm and visual over-limit indicator
  • Peak hold captures highest reading
  • Pocket-sized
PDF (7)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *