Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When temperatures are written down by hand, the measurement itself is rarely the weak linkWhen the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure against
Item number 17-810280

ETI DishTemp®. Smart thermometer for dishwashers. It simulates a plate and stores the maximum temperature for reading.

477 DKK

In stock

DishTemp dish thermometer 

  • Simulates maximum plate surface temperatures
  • Cost-effective, reusable thermometer 
  • More accurate dishwasher controls  
  • Waterproof to IP66
  • Ideal for HACCP compliance  
  • Free traceable calibration certificate
Request a quote 17-810280

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 16

Description

The DishTemp thermometer eliminates the need for expensive and inaccurate test strips and stem thermometers that do not stay in place and fail to register the temperature at the plate surface.

The DishTemp dishwasher thermometer is built to withstand daily use in professional kitchens and indicates temperatures in the range of 0 to 90 °C with a resolution of 0.1 °C/°F and an accuracy of ±0.5 °C.

DishTemp features a durable, watertight seal, is IP66 rated, and comes complete with a free traceable calibration certificate, calibrated at a single point (71 °C).

HOW TO MONITOR DISHWASHER TEMPERATURES FOR HACCP

All UK food businesses are legally required to manage food safety risks using HACCP principles (Hazard Analysis and Critical Control Point). One of these control points is ensuring that porcelain and kitchen equipment are thoroughly cleaned.


As part of this, hot water in sinks and dishwashers must reach a sufficiently high temperature to kill bacteria and viruses and effectively clean dirty dishes.

Range: 0 to 90 °C
Resolution: 0.1 °C/°F
Accuracy: ±0.5 °C
Battery: 3-volt CR2032 lithium coin cell
Battery life: 5000 hours
Display: custom LCD
Dimensions: 14 x Ø127mm
Weight: 120 grams
Packaging material: ABS plastic
Warranty: one year
Water/dust resistance: IP66
Measurement scale: Celsius/Fahrenheit
Certification: FREE traceable calibration certificate
Additional information
Product type

Digital Termometer

Use

Category

Product type

Tilbehør Beskyttelse & Opbevaring

17-832280

Tilbehør Andet

17-8902103,17-8902105

Wireless

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *

Tilbehør Beskyttelse & Opbevaring

ETI Wall Mount in Stainless Steel for DishTemp®
17-832280
163 DKK
Lägg i varukorgen

Tilbehør Andet

ETI Calibration Certificate UKAS, 3 points for instruments and probes (-18, 0, +70°C) *probe required for calibration
17-8902103
945 DKK
Lägg i varukorgen
ETI Calibration Certificate UKAS, 5 points, for instruments and probes (-18, 0, +40, +70, +100°C) *probe required for calibration
17-8902105
1.104 DKK
Lägg i varukorgen