Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 17-816009

ETI pH 9 buffer capsules for calibrating pH meters. Use with 1 dl distilled water – Pack of 10

215 DKK

In stock

pH buffer capsules

  • Used to calibrate pH meters, testers, and probes
  • Supplied in a pack of 10 capsules
  • Available for pH 4.00, 7.00, 9.00, and 10.0
  • pH range: 9.00 pH
Request a quote 17-816009

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

pH Calibration Buffer Capsules – These ready-to-use pH buffer capsules are available in three different values and are suitable for checking pH instrumentation and pH electrodes on our range of pH meters and testers.

These capsules make it easy to regularly verify that your pH meter or tester is correctly calibrated, ensuring the best possible results.

These DIY pH buffer capsules are available in 4 standard values: 4.00 pH, 7.00 pH, 9.00 pH, and 10 pH.

Each capsule yields 100 ml of solution when mixed with distilled water.

Supplied in packs of 10 capsules.

Additional information
Product type

Kalibreringsvæske

pH range

00 pH

Category

Product type

Wireless

PDF (1)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *