Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 17-891911

ETI Fridge & Freezer Thermometer ThermaGuard® Pharm 101, with 1 internal and 1 external probe with 2 metre cable. Includes UKAS calibration certificate for -18, 0°C

1.104 DKK

In stock

ThermaGuard Pharm Thermometers for high accuracy refrigerator temperature monitoring of vaccines and pharmaceuticals

External sensors designed to simulate the temperature of the refrigerator contents
Two models available – single or dual external sensors
Complies with the European standard EN 13485
Optional UKAS calibration certificates available
Programmable high and low audible alarms

 Select other models and calibration from the drop-down menu below

Request a quote 17-891911

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , ,

Description

ThermaGuard Pharm has been specially designed for monitoring storage and transportation temperatures of perishable items such as vaccines, medicines, and foodstuffs. Each thermometer features a large LCD display that simultaneously shows the current and max/min recorded temperatures.
Both units feature programmable audible alarms that allow the user to preset high and low temperature limits. When the alarm is active, the LCD screen flashes. The alarm can be silenced by pressing any button.
Housed in a splashproof IP54 ABS case, both ThermaGuard Pharm models feature a CalCheck 0.0 °C (±0.1 °C) function that allows the user to verify the thermometer’s accuracy at any time, providing confidence that measurements are correct.
Each thermistor probe is enclosed in a sealed bottle. To begin monitoring, simply unscrew and fill with glycol solution (50 ml bottle supplied).
Two models available: ThermaGuard Pharm 101 incorporates two temperature sensors; a remote water-resistant thermistor probe with a two-metre PVC lead for monitoring the product temperature, and an internal sensor for monitoring the ambient room temperature. ThermaGuard 102 incorporates two remote water-resistant thermistor probes, both with two-metre PVC leads for monitoring dual applications. An optional two-point UKAS calibration certificate is available. Each certificate indicates deviations from standards at -18 and 0 °C.
CalCheck functionBoth models of ThermaGuard feature a CalCheck 0.0 °C (±0.1 °C) function that allows the user to verify the thermometer’s accuracy at any time, providing confidence that measurements are correct.
Free wall bracketEach ThermaGuard Pharm is supplied with a plastic wall bracket that incorporates a built-in foot stand, hook for hanging, and screw thread for tripod mounting, allowing users to store or position the unit securely and protect against accidental damage.

Specifications

Internal range: -19.9 to 49.9 °C (101 model only)
External range: -39.9 to 49.9 °C
Max/Min: Yes
Resolution: 0.1 °C/°F
Accuracy: ±0.4 °C
Alarm: Yes
Battery: 2 x 1.5 volt AA
Battery life: 25,000 hours (normal use, without alarm)
Sensor type: Thermistor
Dimensions: 29 x 73 x 96 mm
Weight: 165 grams
Country of manufacture: United Kingdom
Warranty: two years
Certification: optional UKAS calibration certificate available
Complies with standard: EN 13485
Additional information
Product type

Temperatur Datalogger

Model

101 & UKAS 2-point (-18, 0°C)

Tilbehør Beskyttelse & Opbevaring

17-830880,17-832590,17-830800

Tilbehør Andet

17-816035

Category

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *

Tilbehør Beskyttelse & Opbevaring

ETI Silicone Cover – Black, Fits ThermaGuard® and ThermaQ® Wi-Fi Thermometers
17-830880
141 DKK
Lägg i varukorgen
ETI Wall Mount with Base for ThermaGuard®
17-832590
47 DKK
Lägg i varukorgen
ETI Magnetic Base suitable for, among others, BlueTherm One®, ThermaGuard®, etc.
17-830800
94 DKK
Lägg i varukorgen

Tilbehør Andet

ETI Glycol Solution for Filling Probes - 50 ml for ThermaData® Pharma and ThermaGuard® Pharma
17-816035
81 DKK
Lägg i varukorgen