Hoppa till innehåll
Free shipping over 3.519 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 56-AD-06C1

TandD 100-240V AC Adapter, EU Version. For charging/powering TandD loggers and base units

247 DKK

In stock

TandD 100-240V AC adapter, EU version. For charging/powering TandD loggers and base units

Request a quote 56-AD-06C1

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , , , , , , , , , , ,

Other models in the series 16

Description

Power adapter (100-240 V AC, EU plug) for TandD loggers and RTR base units requiring continuous power supply. Use it in installations where battery operation is not desired — wall-mounted base units, refrigerators near power outlets, or laboratory benches.

Compatible with

  • Loggers: 56-MCR-4TC, 56-MCR-4V, 56-RTR-576, 56-RTR-576-S, 56-TR-76UI, 56-TR-76UI-S, 56-TR32B, 56-TR41A, 56-TR42A, 56-TR43A, 56-TR45
  • Receivers: 56-RTR500BC
  • Others: 56-RTR-500A2
IP Rating : None
Compatible devices
Cable length : 1.5 m
Note : When using with TR7 Series the logger body will become hot. Also note that the data logger itself will generate heat and the internal sensor will measure a temperature higher
Note When using with TR7 Series the logger body will become hot. Also note that the data logger itself will generate heat and the internal sensor will measure a temperature higher
Additional information
Product type

Specification

Power adapter (100-240 V AC, EU plug) for TandD loggers and RTR base units requiring continuous power supply. Use it in installations where battery operation is not desired — wall-mounted base units, refrigerators near power outlets, or laboratory benches.

Compatible with

  • Loggers: 56-MCR-4TC, 56-MCR-4V, 56-RTR-576, 56-RTR-576-S, 56-TR-76UI, 56-TR-76UI-S, 56-TR32B, 56-TR41A, 56-TR42A, 56-TR43A, 56-TR45
  • Receivers: 56-RTR500BC
  • Others: 56-RTR-500A2
IP Rating : None
Compatible devices
Cable length : 1.5 m
Note : When using with TR7 Series the logger body will become hot. Also note that the data logger itself will generate heat and the internal sensor will measure a temperature higher
Note When using with TR7 Series the logger body will become hot. Also note that the data logger itself will generate heat and the internal sensor will measure a temperature higher
PDF (1)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *