Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can Trust
Item number 78-1002659-001

Checklite AT100 100 determinations

4.290 DKK

In stock
  • Highly sensitive microbial biomass analysis based on the ATP measurement method
  • No centrifugation required
  • Reduces time and effort for aseptic testing of milk, sour drinks, etc.
  • Easy to use
Request a quote 78-1002659-001

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Description

78-1002659-001 Test hygiene > Checklite

The CheckLite AT100 is a microbial biomass analysis kit based on the ATP measurement method. It is particularly suitable for aseptic testing of acidic beverages and retort food after appropriate incubation. It contains thermostable firefly luciferase and an ATP-eliminating reagent.
Luciferase reacts specifically with ATP, producing a directly proportional amount of bioluminescence. ATP levels due to extracellular ATP from emulsified products, such as milk, cream, and products containing milk, can be several orders of magnitude higher than the ATP levels found in other food products. This high level of ATP interferes with the sensitive detection of intracellular ATP from contaminating microorganisms. With CheckLite AT100, somatic cells and micelle structures are broken down, and the released ATP and any extracellular ATP are degraded to very low concentrations compared to other ATP methods, enabling sensitive detection of bacteria in emulsified product samples.

1 x 100 analyses


Kit composition
Luciferin-luciferase reagent HS – 2 bottles dark green marked
Reconstitution buffer for Luciferin-luciferase reagent – 5.5 ml x 2 vials pale pink marked
ATP reagent – 5.5 ml x 2 plastic bottles light blue marked
ATP-ELIMINATING REAGENT – 2 vials red pink marked
Reconstitution buffer for ATP-eliminating reagent – 5.5 ml x 2 vials yellow marked
Sample dilution buffer – 25 ml x 4 plastic bottles dark blue marked
Sample treatment reagent – 5.5 ml x 2 plastic bottles brown marked


The concentration of ATP in living cells changes rapidly. Therefore, extract ATP from cells or freeze the cells immediately after sampling. Even during extraction, it may be necessary to inhibit or destroy ATP-degrading enzymes to prevent the enzymes from reducing the ATP concentration.
Prepare the bioluminescence and ATP-eliminating reagents according to the manual. After preparation of the samples, mix the reagent and samples to start the reaction.
By measuring the bioluminescence in a luminometer, such as the recommended C-110, the level of ATP can be determined. These results can be quantified by plotting against a prepared standard curve. The number of microbial cells (colony-forming units, CFU) can be obtained based on the correlation between the amount of ATP and the number of CFU counted in advance using the traditional colony counting method.
For more information, see the manual.

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *