Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can Trust
Item number 82-OJ-20X

Replacement Lenses for Peak Lupe Microscope

766 DKK

In stock
Request a quote 82-OJ-20X

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 7

Description

82-OJ-20X Accessories > Eyepieces and lenses for Peak-Lupe and Cellcheck

The Peak Lupe 2034 and 2054 series microscopes offer the ability to change the magnification by changing the lens. Four additional recesses are already included in the standard transport cases for the safe transport of replacement lenses. The lenses feature a screw thread for extremely easy replacement.

However, the measuring scales require special attention. For example, if a microscope with a magnification of 100x is used with a 0.01 mm scale, the reading will be incorrect when the lens is changed. Therefore, extra lenses should be ordered together with the corresponding eyepieces. It is not necessary to change the eyepiece for simple visual inspection.

Select the magnification to order the correct lens. 7 lenses are available:

Lens Magnification
2x 20x
4x 40x
6x 60x
10x 100x
15x 150x
20x 200x
30x 300x
Additional information
Product type

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *