Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 82-ES-180

Electronic digital caliper, ES series, measuring range 180mm, with 10x magnifying lens

24.334 DKK

In stock
Request a quote 82-ES-180

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 14

Description

82-ES-180 Length Measurement > Electronic length measurement with microscope

The electronic measuring scale has become a standard instrument in the graphic arts industry in many countries, for applications where the exact length of measurements is performed significantly more easily. The hardened guide made of stainless steel is equipped with an inductive readhead. It provides the electronics with information about the instantaneous position of the measuring carriage, making it free from wear, for example, unlike linear ball bearings. The coated, four-lens optical system with a 10x magnification factor makes it possible to move to the exact measuring point. The magnifier has a fine focus for adaptation to your specific correction and is equipped with a hair cross for exact positioning of the measuring carriage. The hard chrome-plated graduations on this plate ensure exact measuring values.

A clever parallax control ensures that the viewing angle is perpendicular to the lens. The easy-to-read display with six-millimeter-high characters shows a maximum resolution of 0.10 millimeter or 0.0005 inch. A fine adjustment is located immediately next to the display. The horizontal leveling screw moves the carriage sensitively to the measuring point. The zero point of the measurement can then be set by pressing the reset button. After moving the carriage to the second measuring point, the result can be read on the display. The system has an RS232 interface. This allows serial transfer of the values to the computer. An RS232-compatible interface cable with optical coupling, as an alternative, is available for data transfer.

Available standard lengths 180 mm / 7 inch
300 mm / 12 Inch
500 mm / 20 Inch
800 mm / 32 Inch
1000 mm / 40 Inch
1300 mm / 52 inch
1500 mm / 60 Inch

Resolution 0.01 mm / 0.0005 in
Repeatability 0.01 mm.

Error range up to 500 mm = 0.03 mm
up to 800 mm = 0.04 mm
up to 1000 mm = 0.05 mm
up to 1300 mm = 0.10 mm
up to 1500 mm = 0.15 mm

LCD display, 3V lithium battery, Lifespan approx. 4000 hours
Temperature range: +10 to +40 °C
RS232 compatible interface
Reticle: Standard or PCB
Wooden transport/storage case included

Download the product datasheet for more information. Lead time is 3 weeks from receipt of order.

Additional information
Product type

Measuring scale

Magnification range

PDF (1)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *