Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 28-KM20REF

Reference Thermometer (Pt100) with Fixed Probe, -100°C to +199.9°C with 5-Point UKAS Certificate at -18°C, 0°C, +8°C, +20°C, +70°C and Free Fall.

4.043 DKK

In stock

The KM820/VAL calibration control unit is designed for contact and infrared thermometers and should be used in conjunction with a digital probe thermometer, such as the KM20REF reference thermometer.

Request a quote 28-KM20REF

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 16

Description

The KM20REF is a high-accuracy reference thermometer for verifying the calibration of all types of thermometers and probe combinations. It utilizes Platinum Resistance Thermometer (PRT) technology and features a permanently connected PRT probe for maximum system accuracy.

Features:

  • Displays temperature in Celsius
  • Supplied with a 5-point UKAS calibration certificate (points at -18°C, 0°C, +8°C, +20°C, +70°C)
  • Automatic power-off function
  • Supplied with a carrying case

The high-accuracy KM20REF reference thermometer can be used in conjunction with the KM820/VAL Validation Calibration Check Unit to calibrate contact and infrared thermometers.

Additional information
Product type

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *