Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can TrustVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesSurface temperature reads incorrectly if the emissivity doesn’t match the materialWhen the Bore Looks Round but the Measurement Still Misleads: How Three Contact Points Give You a Number You Can Trust
Item number 17-823514

ETI pH electrode, for insertion into semi-soft materials, with BNC connector, compatible with e.g. models ETI 8000 & 8100

1.212 DKK

In stock

Budget knife-type pH electrode.

Perfect for insertion into meat, cheese, or similar materials
Stainless steel housing
Ø12 x 120 mm
Operating temperature range 6 to 60 °C

Request a quote 17-823514

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , ,

Other models in the series 16

Description

This pH electrode from Budget Meat Knife is ideal for insertion into meat, cheese, or similar products. The knife probe can also be used in a wide variety of applications within the food processing and agricultural sectors.
The probe dimensions are Ø12 x 120 mm. Operating temperature range 6 to 60° C, pH range 0-14pH, accuracy 0.1 pH.
One of a range of pH electrodes and probes that are fully interchangeable and designed for use with 8000, 8100, WalkLAB and MicroBench pH meters or similar pH meters. All ETI pH electrodes and pH probes are suitable for a broad spectrum of pH measurement applications.

Additional information
Product type

pH-Føler

Wireless

Category

Probe contact switch

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *