Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 17-816071

ETI Calibration Solution, 2.8 mS for calibrating salinity meters

108 DKK

In stock

2.8 mS standard solution for nutrient probes (17-816071)

Enables easy recalibration of HortiCare nutrient probes
2.8 mS (28 cF or 1900 ppm)

Request a quote 17-816071

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , ,

Other models in the series 16

Description

Calibration solution for nutrient testing – A ready-to-use 2.8 mS standard solution suitable for calibrating your ETI nutrient testers.
Easy to use – makes it simple to verify calibration.
Although your tester is calibrated at the time of manufacture, it is recommended that you recalibrate your HortiCare Nutrient Tester regularly to maintain the desired accuracy of the tester and deliver optimal, reliable results. Supplied in a 90 ml bottle.

Additional information
Product type

Kalibreringsvæske

Wireless

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *