Hoppa till innehåll
Free shipping over 3.000 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 28-DHH

Thermometer for hot holding with indications for approved HACCP zone +38° to +80°C

39 DKK

In stock

The DHH stainless steel hot holding thermometer features a HACCP zone on the dial. We understand that it is crucial to keep food warm until it is served to prevent the growth of harmful bacteria. Hot food must be held at 63 °C or higher, with certain exceptions. The red HACCP zone makes it easy to verify that the hot holding temperature is within optimal levels.

Request a quote 28-DHH

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category:

Other models in the series 16

Description

The DHH stainless steel holding thermometer features a HACCP zone on the dial. We know that it is crucial to keep food warm until it is served to prevent the growth of harmful bacteria. Hot food must be stored at +63 °C or higher, with certain exceptions. The red HACCP zone makes it easy to see if the holding temperature is at optimal levels.

The DHH stainless steel holding thermometer can stand or be hung in a holding cabinet for convenient temperature monitoring.

  • Temperature range +100° to +175°F / +40° to +80°C
  • Accuracy ±1 division
  • Stands or hangs

 


About HACCP

Food businesses must conduct a risk analysis of their food operations and implement appropriate and sufficient controls to eliminate the risks posed by identified hazards. They will need a fully documented food safety management system based on the HACCP principles (Hazard Analysis and Critical Control Point).

 


Holding temperatures

The UK Food Standards Agency has specified that food intended for service or display for sale, which has been cooked or reheated and must be kept hot to control the growth of pathogenic microorganisms or the formation of toxins, shall be stored at a temperature of +63 °C or above.

 

Additional information
Product type

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *