Hoppa till innehåll
Free shipping over 3.738 DKK ex VAT! Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 17-222053

ETI Precision Thermometer, high-accuracy thermometer for PT100 probes. Supplied without probe. Lumberg connector

1.064 DKK

In stock

Precision PT100 High Accuracy Thermometer

High accuracy ±0.2 °C
2-year warranty
Polygiene BioMaster product protection
Complies with European standard EN 13485

Price is for instrument only with free traceable certificate

Request a quote 17-222053

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , , ,

Other models in the series 16

Description

The Precision thermometer is a high-accuracy PT100/RTD thermometer that conforms to EN 13485, featuring a 0.1 °C resolution over the range of -199.9 to 850 °C, with an accuracy of 0.2 °C.
Please note: the stated accuracies are for the instrument only.
Conveniently located on the front of the instrument are the on/off, max/min, and display buttons. The binder probe socket is located at the top of the instrument, allowing a variety of PT100/RTD probes to be used depending on the application.
The Precision thermometer features a large, easy-to-read LCD display with open circuit “Err” and low battery indication. Each thermometer is powered by three 1.5-volt AAA batteries that provide a minimum of 2000 hours of battery life. The units will power off automatically after ten minutes, maximizing battery life. This feature can be disabled by the user if required.
The instrument is housed in an ergonomic, robust case containing BioMaster product protection to reduce bacterial growth. 
The Precision thermometer is priced excluding the probe, but includes a traceable calibration certificate. To add recommended probes and other accessories, make your selections from the “Add accessories” drop-down menu and then click the “Buy now!” button.
ETI offers an extensive range of interchangeable probes covering most industrial and laboratory applications. 
To regularly check the accuracy of each Precision thermometer, a range of calibration test caps complete with a UKAS calibration certificate is available; click here to view.
Optional accessories
17-830251 protective silicone boot – The Precision thermometers are waterproof to IP63 when used in conjunction with this protective boot 17-832050 wall bracket (screws not included) and protective silicone boot.
 

Specifications

Measuring range: -199.9 to 850 °C
Max/Min: Yes
Resolution: 0.1 °C
Accuracy: ±0.2 °C
Battery: 3 x 1.5 volt AAA
Battery life: 2000 hours
Sensor type: PT100
Display: 10 mm LCD
Dimensions: 25 x 56 x 128 mm
Weight: 130 grams
Case material: ABS plastic contains Biomaster product protection
Country of manufacture: United Kingdom
Warranty: two years
Measurement scale: Celsius/Fahrenheit
Certification: FREE traceable calibration certificate
Complies with standard: EN 13485
Additional information
Product type

Digital Termometer

Tilbehør Følere

17-160222

Tilbehør Beskyttelse & Opbevaring

17-830221,17-832050

Tilbehør Andet

17-8902103,17-8902105

Wireless

Probe contact switch

PDF (2)
Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *

Tilbehør Følere

ETI Probe, PT100 RTD Probe, Liquid Probe with Handle, Ø3.3 mm x 130 mm, 1 Meter Cable, Lumberg Connector
17-160222
1.010 DKK
Lägg i varukorgen

Tilbehør Beskyttelse & Opbevaring

ETI Soft silicone cover for protecting e.g. thermometers in the Therma® series, - white
17-830221
81 DKK
Lägg i varukorgen
ETI Wall Mount in Stainless Steel with White Silicone Sleeve, Compatible with ThermaCheck®, CaterTemp®, FoodCheck®, etc.
17-832050
175 DKK
Lägg i varukorgen

Tilbehør Andet

ETI Calibration Certificate UKAS, 3 points for instruments and probes (-18, 0, +70°C) *probe required for calibration
17-8902103
945 DKK
Lägg i varukorgen
ETI Calibration Certificate UKAS, 5 points, for instruments and probes (-18, 0, +40, +70, +100°C) *probe required for calibration
17-8902105
1.104 DKK
Lägg i varukorgen