Hoppa till innehåll
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%
Volume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground StakesVolume discount: 5 pcs 2% · 10 pcs 3% · 25 pcs 5%When the Hole Is 500 mm Deep, the Measuring Instrument Has to Keep UpSee why the drain is blocked before you tear up the floor: a camera on five meters of cableWhen two hands measure the same bore differently: How three measuring points eliminate operator errorWhen the Bore Has to Be Measured Right: How a Self-Centering Three-Point Micrometer Removes Operator UncertaintyThree measuring points give a bore diameter that doesn’t depend on who is measuringWhen the multimeter shows 90 volts on a disconnected cable: how to tell ghost voltage from the real thingRead the tolerance in seconds when the micrometer shows the deviation directlySmall holes are rarely measured correctly with two points: how three contact points give you a diameter result you can trustYour measurement is never better than the surface you measure againstHow to Measure Ground Resistance Without Disconnecting the Ground Connection and Without Ground Stakes
Item number 17-825078

ETI Mounting Plates for Kamado Smoker, Smoke

158 DKK

In stock

Kamado mounting plates for ribs

Easy attachment for bellows fan
Easy to install
Size guides below

Request a quote 17-825078

Volume discount: 5 pcs: 2% · 10 pcs: 3% · 25 pcs: 5%

Category: , ,

Other models in the series 16

Description

This pair of Kamado Mounting Plates for Billows enables easy installation of the Billows temperature control fan next to your Kamado Smoker.
Billows is designed to work with most smokers. Some applications may require an optional mounting kit.
Kamado-style smoker Mounting Plates for Billows
Large plate: 3.54 H x 3.01 W x 0.01 D inches (90 H x 76.5 W x 0.5 D mm)
Small plate: 3.11 H x 2.75 W x 0.01 D inches (79 H x 70 W x 0.5 D mm)
Both mounting plates have an opening of 1.25 x 1.25 inches (33 x 33 mm).
Universal bellows mounting kit Fits factory-installed ports measuring 30 mm (1.18 inches) in diameter.
3/4″ threaded bellows mounting kit
Designed to screw into a 3/4″ ball valve
1.5″ threaded bellows mounting kit
Designed to screw into a 1.5″ ball valve
2″ threaded bellows mounting kit
Designed to screw into a 2″ ball valve

Additional information
Product type

Stativ & Beslag

Wireless

Reviews (0)

There are no reviews yet.

Be the first to review

Your e-mail address is not published.

Your rating *